New Wholecloth Patterns Morris Tote Sewing Pattern

The new

Quilted Morris Mini Tote

sewing pattern is available in the shop!

The Quilted Morris Mini Tote is the tiny version of a classic tote bag. The quilted body gives the Morris a soft structure and the front and interior pockets are quilted and folded to show off the fabrics on both sides. All of the edges and seams are finished with binding, creating another opportunity to mix prints or highlight a special fabric. 

The sewing pattern includes:

- clear step by step illustrated instructions

- dimensions to draft you own pattern pieces or cut the pieces directly from fabric

- instructions to make coordinating bias binding and handles, or substitute ready-made

- instructions to quilt your own fabric, or substitute pre-quilted

- dimensions in inches and centimeters

Finished bag dimensions: 9 x 7 x 4 in (22.1 x 17.8 x 10.2 cm)

Get the pattern:

Exterior: The front of the Morris Tote has a quilted open pocket with a folded cuff to show off the backing fabric. The pattern includes instructions for binding all of the bag edges and making crisp mitered corners on the pocket. Vertical lines of quilting add soft structure to the Morris allowing the bag to stand up on its flat 4" bottom. 

Interior: The interior has a quilted open pocket, and all of the seams and edges are finished with straight grain binding. 

Supplies: 

The entire bag can be made from self-quilted fabric and a little bit of low loft quilt batting. There are no special zippers or hardware. My goal was to design a bag you could sew in a hurry with fabric from you stash. You can easily substitute pre-quilted fabric, 1" webbing for the handles and use ready made binding. 

Difficulty: 

The Morris Tote is a good fit for advanced beginner sewists. It involves binding multiple layers of fabric that can take a little bit of practice to get a neat finish. If you're familiar with the process of binding seams for quilts or garments this pattern will be a piece of cake. A determined sewist with a few patterns under their belt can always take it one step at a time. 

Sewalong: 

I'm planning a full video sewalong making the Morris Tote from start to finish. The sewalong will make this pattern more accessible to less experienced sewists. Sign up for the newsletter to be notified of the final dates for the sewalong. Or subscribe to the Wholecloth Patterns Youtube channel.

The Morris Tote sewing pattern is 30% off until Monday, December 2, 2024. No code necessary.

Follow Wholecloth Patterns:

Etsy: Wholecloth Patterns

Youtube: Wholecloth Patterns

Instagram: @_wholecloth #wholeclothpatterns

Newsletter: Join here

TikTok: @_wholecloth 

6 Tips for Quilting Fabric for Bag Sewing

 

Before I switch gears to new patterns and fall sewing, let me clear the worktable of my last summer sewing project. The sewalong for the Logan Bag drawstring bucket backpack featured self-quilted fabrics. This is a great technique for personalizing handmade bags, so I've put together a how-to video and a list of tips focused on quilting fabrics for bag making. You can use these techniques for just about any bag or garment sewing project. 

Quilted fabric is a great choice for handmade bags. The layers of quilt batting, fabric, and stitches work together to provide the structure and durability that can stand up to the wear and tear of a handbag. Changing the weight of the fabric, the fiber and thickness of the batting, or the spacing of the quilting allows you to manipulate the structure of your finished fabric. You could use pre quilted fabric, but you'll have better choices and more control if you quilt it yourself.  

These tips are directed toward quilting small or shaped pieces of fabric where avoiding distortion can be a bit tricky. You could quilt the fabric and then cut out your pattern pieces (a completely legit way to tackle a quilted project), but I prefer to quilt the pattern pieces individually. It gives me more control over the placement of the fabric print and the lines of quilting on the finished project. 

A full How-to Quilt Fabric for Any Bag video tutorial is on the Wholecloth Patterns Youtube channel now. Or scroll down to see my tips for quilting fabric to make bags. 

6 Tips for Quilting Fabric to Make Bags

1. Pin across the whole fabric.

The key to successful quilting is to prevent the fabric from slipping and sliding around on top of the batting. Don't just pin around the edges of the fabric, space the pins across the body of the fabric at 2-3" intervals. These fixed points keep the fabric from slipping around while you sew those first few lines of quilting. 

2. Cut the quilt batting bigger than the fabric piece.

When sewing quilted bags cut the pattern pieces out of your main fabric, but not the quilt batting or backing fabric. Cut the batting and backing about an inch bigger than the main fabric pieces. This has 2 advantages. First you can precisely position your quilt lines relative to the shape of your finished bag. Second, any minor shrinkage or distortion to the main fabric pieces due to quilting can be adjusted before you construct your bag. 

3. Use a walking foot. 

When quilting any fabric, or sewing very thick squishy fabrics, switch to the walking foot for your sewing machine. The walking foot lifts up as the needle goes down reducing the chances that the presser foot will push the fabric out of alignment as it sews. 

4. Start quilting in the middle.

It's tempting to start quilting at one edge of the pattern piece and work across the whole body of the fabric in one wave, but this increases the chances of distorting the fabric as you quilt. Begin your first line of quilting at the center of the fabric and work toward the edges. Starting in the middle shortens the distance between the starting line and the finish line of quilting, reducing the length of fabric that can be shifted out of place. 

5. Alternate the direction of the quilting.

If you first sew from bottom to top, next sew from top to bottom. This zig zag movement across the pattern piece helps to correct, rather than increase, any shift in the fabric. 

6. Sew over the edges.

Do not backstitch! It can be counterintuitive for bag makers, and garment sewists who are in the habit of anchoring their seams for strength. When quilting, sew right over the edge of the fabric. The extra perimeter of batting (and possibly backer fabric) will be trimmed off after quilting. It leaves loose ends of of stitching that could make a bag sewist nervous, but those stitch lines will be secured within the seam allowance when you make your bag, and trimming the over run with the batting leaves the neatest edges. 

Ready to sew a quilted bag? Get your copy of the Logan Bag drawstring bucket backpack, and try out your new skills. 

Follow Wholecloth Patterns

Etsy: Wholecloth Patterns

Youtube: Wholecloth Patterns

Instagram: @_wholecloth #wholeclothpatterns

Newsletter: Join here

TikTok: @_wholecloth 

Wholecloth Logan Bag Video Sewalong

 

The Logan Bag sewalong is now available on the Wholecloth Patterns Youtube channel. These video sewing instructions will cover every step of making the Logan Bag drawstring bucket backpack. I've broken the sewing tutorial into two manageable sections. In Part 1 we'll get an overview of the bag, compare the standard and mini sizes, and discuss options for making the bag in just about any weight of fabric. Then we'll sew the body of the bag. In part 2 we'll pick up where we leave off by sewing the lining right on through to attaching the drawstring at the end of the pattern. 

I'm calling the Logan Bag an intermediate pattern because it requires sewing some bulky seams around piping where a bit of precision is required. I hope that the video tutorial will make this pattern accessible to less experienced sewists. Watch me sew the bag and build the knowledge and confidence to make your own. 

The video instructions are available to everyone, but you'll need a copy of the sewing pattern to make the Logan Bag. 

Basic Sewing Skills Tutorials for Making the Logan Bag.

The Wholecloth Patterns Youtube channel is filling up with video tutorials for basic bag making skills. You can kick-start your Logan Bag sewing by prepping perfect piping to match your bag using the How-to Make Your Own Piping tutorial.  Learn how to install the bag hardware with the How-to Install Heavy Duty Snaps, and How-to Install Eyelets videos. Get the finishing touches just right with the How-to Tie the Fisherman's Knot video. All of these are skills to add to your sewing arsenal, and the perfect place to start if you're a beginner. 

Fabrics & Supplies Used in the Logan Bag Sewalong.

Pocket Fabric: Indian Block Print Cotton from Fibers to Fabric

Body Fabric: Indian Block Print Cotton from Fibers to Fabric

Linine Fabric: Indian Block Print Cotton from Fibers to Fabric

Quilt Batting: Warm and Natural Cotton Batting

The block prints were gifted from Fibers to Fabric. It's an easy source for color matched prints of different prints. 

Watch the Logan Bag Sewalong Videos.

Watch the full Logan Bag tutorials or hop around the videos using the time stamps in the text below the video. Use them to rewatch the parts you need, and skip the parts you don't. Of course, please like and subscribe if you find the information helpful! Watch Part 1 Watch Part 2

Follow Wholecloth Patterns

Etsy: Wholecloth Patterns

Youtube: Wholecloth Patterns

Instagram: @_wholecloth #wholeclothpatterns

Newsletter: Join here

TikTok: @_wholecloth 

NEW How-to Install No Sew Eyelets Video & Tutorial

 

The Wholecloth Logan Bag uses a drawstring top closure where the string travels through eyelets  around the top opening of the bag. I'm going to demonstrate how to install the Dritz Extra Large Eyelets on the Standard size Logan Bag, but the process is the same for the smaller eyelets used on the Mini Logan. 

I like the Dritz Eyelets because they can be installed with basic household tools, and don't require special pliers. The Dritz eyelet kit comes with a little tool for setting the eyelets that can easily be stored with any leftover hardware. It's a basic, entry level supply that any beginner can use. I've used them for all of my sample Logan Bags and have found them to be durable too. 

Let's start with the difference between eyelets and grommets. While they are technically two different things Dritz, the company that manufactures most big box sewing hardware like this, uses them interchangeably. Their grommet tool is used to install Extra Large Eyelets. Their grommets sometimes have a third piece, a plastic washer that compresses in the space between the decorative front hardware and the facing on the back, but not always. For basic bag sewing, you could use Dritz grommets and eyelets interchangeably. I'm calling this an eyelet tutorial, because I use the Dritz hardware, and that is how they are labeled. 

Watch the How-to Install Eyelets video on the Wholecloth Patterns Youtube channel, or follow the tutorial instructions below. 

Eyelet Setting Tools & Supplies

Dritz Extra Large Eyelets

Dritz 1/4" Eyelet Kit

Wholecloth Logan Bag Sewing Pattern

Fabric: Block print cotton gifted from Fiber to Fabric on Etsy. Large blue print. Small blue print. Cream print.

How-to Install Dritz Extra Large Eyelets

The Dritz Extra Large Eyelets consist of two pieces. The piece that goes on the outside of your project is more decorative and has a short tube around the center opening. The piece that goes on the inside of your project has small prongs around the center opening. 

To install the eyelets you need a little two piece tool that in included with the eyelet kit. The flat round piece (shown on left) is the base. It holds the outside of the eyelet while you set it. The other piece is a setting pin that goes inside the eyelet and you hammer on one end to set the eyelet. 

The inside facing piece goes over the little tube in the back on the outside piece with the fabric sandwiched between. When you set the eyelet the tube is rolled down to touch the facing and lock the eyelet onto the fabric. 

To set the eyelets mark the center point of where the eyelet will be on your fabric. Center the outside piece of the eyelet on the mark and trace the inside of the center ring with a chalk pencil. 

Cut out the inside of the circle you just marked. You can do this by cutting an X across the circle with scissors or an xacto knife. 

Trim the flaps of the X to make an opening in the fabric. Cut a little bit at a time, frequently checking to see if the center tube of the front of the eyelet fits through the hole. It's better to be a little too small than too large. 

Push the front of the eyelet through the hole. 

Turn the project over so you are now working from the wrong side of the fabric. Place the base of the setting tool on your work surface, and place the outside of the eyelet in the base. There is a dip around the middle of the base that accommodated with ridge in the eyelet. 

Working from the wrong side of the fabric, place the eyelet facing over the tube of the outer eyelet, with the prongs pointing toward the fabric. Place the short end of the setting pin into the center hole of the eyelet.

Hammer the end of the setting pin a few times. Use moderate pressure when hammering. The ridge around the setting pin rolls the tube down around the eyelet facing as you hammer. If you hit the pin too hard it can crack the tube. Hammer gently (is that a thing?!) so that the tube rolls evenly. 

Check to see that the front and back of the eyelet are firmly connected. If you can wiggle the facing, hit it a few more times with the hammer and setting tool. 

When the eyelet is firmly attached to the bag you're finished! Move on to the next eyelet. 

Follow Wholecloth Patterns

Etsy: Wholecloth Patterns

Youtube: Wholecloth Patterns

Instagram: @_wholecloth #wholeclothpatterns

Newsletter: Join here

TikTok: @_wholecloth 

How-to Install Heavy Duty Snaps Video & Tutorial

The Wholecloth Logan Bag uses a snap closure on the front pocket.  I often use the Heavy Duty Snap from Dritz. It is one of my favorites because it doesn't' require special pliers (that you have to buy, store, and remember where you put them when you're ready to set a snap) to install, making it a good choice for a beginner sewists. The only additional tool you'll need is a hammer. They are also easy to get, you can find these snaps at most big box fabric and craft stores and amazon. 

Watch the full How-to Install Heavy Duty Snaps video on the Wholecloth Patterns Youtube channel, or follow the instructions below. 

Snap Setting Tools and Supplies

Snaps: Dritz Heavy Duty Snaps

Setting Tool: Dritz Heavy Duty Snap Setter

Wholecloth Logan Bag Sewing Pattern

Fabric: Block print cotton gifted from Fiber to Fabric on Etsy. Large blue print. Small blue print. Cream print.

How-to Install No Sew Snaps

Each snap is made up of 4 pieces. The functional pieces of the snap are the stud, which is the piece with the little nub, and the socket, which is the piece with the hole. The other pieces are facings that hold the snap to the fabric. The one shaped like a disk is the decorative piece that goes on the front of the pocket. The one that is shaped like a ring goes on the back of the pocket. 

Both facings have prongs on one side. These prongs are aligned with a ridge on the back of the snap pieces with the fabric sandwiched in-between. Setting the snap squishes these pieces together, locking the prongs into the ridge to hold the snap to the fabric

The snaps are set with a little metal tool. One side is the base that holds the facing side of the snap. The other side is a T shaped tool. The flat side goes over the snap, and you hammer on the narrow end to set the snap. 

To set the heavy duty snap start by marking the location of the snap on the front of your pocket. I'm showing the location here with crossed pins. Center the front facing over the mark on the fabric. Push the prongs through the fabric. This can take a little manuvering. If you're having trouble pushing the prongs through thick, or tightly woven fabric use a pencil eraser to push the fabric around the prongs.

Align the prongs of the facing with the ridge on the back of the socket side of the snap. When you can feel that the prongs are aligned hold all the layers together and place the facing in the base of the setting tool. Place the other side of the setting tool over the snap. 

Hammer on the end of the setting tool 5 or 6 times to mould the pieces of the snap together. Check to see that the 2 sides of the snap are firmly connected. When in doubt hammer it a few more times. 

Find the location of the back side of the snap. You can measure to find the location, but I usually use the front side of the snap. You can feel the location of the front snap when you push the ring facing through the fabric.

Repeat the setting process with the back side of the snap. The setting tool has a hole in the middle of the bigger end to accommodate the stud side of the snap. 

Follow Wholecloth Patterns

Etsy: Wholecloth Patterns

Youtube: Wholecloth Patterns

Instagram: @_wholecloth #wholeclothpatterns

Newsletter: Join here

TikTok: @_wholecloth 

 

Wholecloth Fairmount Bag Sewalong Videos

The Fairmount Bag sewalong is now available on the Wholecloth Patterns Youtube channel. These video sewing instructions will cover every step of the Fairmount Bag sewing pattern. I've broken the sewing tutorial into two manageable sections. In Part 1 we'll cut out the pattern pieces, go over the supplies you'll need for your bag, and cut out the fabric. We'll attach the piping to the View A sides and quilt the View B sides. Then we'll prepare all the parts and pieces needed to sew the bag in Part 2. In Part 2 of the Fairmount Bag sewalong we assemble the bag. I'm demonstrating with a View A bag, but the instructions are the same for both views. 

I'm calling the Fairmount an intermediate sewing pattern because it requires a few points of precision sewing on bulky seams, but a confident beginner could tackle this bag using the sewalong. My goal was to compliment the writing and illustrations in the pattern instructions with a few tips for avoiding mistakes, and clearing the way to a successfully sewn bag. 

The video instructions are available to everyone, but you'll need a copy of the sewing pattern to make the Fairmount Bag. 

Basic sewing skill tutorials for the making the Fairmount Bag.

You can kick-start your Fairmount Bag sewing by prepping a few of the supplies ahead of the sewalong. You can make the perfect piping and bias tape to match your bag using the How-to Make Your Own Piping, and How-to Make Bias Tape tutorials.  If you're using a metal zipper for your bag, you'll want to shorten it to the perfect 13" using the How-to Shorten a Metal Zipper tutorial. All three are core sewing skills to add to your sewing arsenal, and the perfect place to start if you're a beginner. 

Fabrics used in the Fairmount Bags in the sewalong.

Main fabric for View A: 8.5 oz canvas in Walnut from Blackbird Fabrics

Main fabric for View B and lining of View A: Merchant and Mills Elora Indian Cotton

Quilt Batting: Warm and Natural Cotton Batting

Lining of View B: Merchant and Mills Cara Indian Block Print

View A piping and View B pocket: Merchant & Mills Everyday Denim Chambray

All Merchant & Mills fabrics are from Oaks Fabrics. 

Watch the Fairmount Bag sewalong videos.

These videos are a skosh longer than my usual Youtube tutorial. You can hop around the video using the time stamps in the text below the video. Use them to rewatch the parts you need, and skip the parts you don't. Watch Part 1 Watch Part 2

Follow Wholecloth Patterns

Etsy: Wholecloth Patterns

Youtube: Wholecloth Patterns

Instagram: @_wholecloth #wholeclothpatterns

Newsletter: Join here

TikTok: @_wholecloth